Timers : TAG Heuer Chronoprinter 505

From SplitSecond
Revision as of 06:43, 17 October 2009 by Geoff (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

TAG Heuer Chronoprinter 505

The 503 must be started the following way. Otherwise the computer will not recognize the data.

  • Turn it on by moving the switch to manual
  • Enter the time of day (military time). For example if it was 2:35pm enter 1435 then press Enter
  • For 'Precision?' press Enter which will accept as 1/1000. It must be set to 1/1000!
  • The solid black lines on the display indicate the inputs are blocked. To unblock them press each of the red buttons at the bottom of the keyboard once.
  • Start the timer by pressing one of the green buttons or an impulse on input 1.


back to list of timers